How the lawn mower works?
Dec 16, 2025
Comb-tooth rotating bevel gear speed-increasing transmission mechanism and comb-tooth profiling depth-adjusting device group; front and rear axles driven by the bevel gear speed-increasing transmission mechanism directly driven by the ground wheels supported by bearing seats under the beams on both sides of the frame, front and rear combs The axial center line of the tooth is located directly above the double eyelet of the large ridge or the single eyelet of the small ridge. Each machine can be configured with 6 to 10 groups; the left and right single-wing weeding shovel and comb teeth are correspondingly arranged on the front cross beam; The structure of the weeding machine is 8 to 10 times more efficient than manual weeding, the rate of damage to seedlings is low, and the rate of cleaning seedlings is average.
The foam filter element is cleaned every 25 hours, and the dust should be more frequent.
The foam filter element is cleaned with kerosene or washing liquid and water, squeezed to dry,
The paper filter element is cleaned every 25 hours, more frequently when the dust is large.
The front filter with a front air filter is cleaned every 25 hours, and the paper core is cleaned every 100 hours. It should be more frequent when the dust is large. The cleaning of the front air filter is the same as the foam filter element. The paper filter element should be tapped on a flat surface.